Product Description:
Rohde & Schwarz, Inc. FSL616 Spectrum analyzer 9 kHz - 6 GHz -135 - +20 dBm, RBW 300 Hz - 10 MHz incl. tracking gen. 1 MHz - 6 GHz (P/N 1300.2502.16)
The Rohde & Schwarz, Inc. FSL616 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSL616. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Rohde & Schwarz, Inc. FSL616 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz, Inc. FSL616 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz, Inc. FSL616 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
Performance Characteristics of the FSL616
| Type |
Analyzer |
| Input Impedance |
50 Ohm |
| Minimum Frequency |
9 kHz |
| Maximum Frequency |
6 GHz |
FSL616 Physical Dimensions
- Width: 408.8 mm(16.09 in)
- Height: 158.1 mm(6.22 in)
- Length: 465.3 mm(18.31 in)
- Weight: 7 kg(15.43 lb)
More Rohde & Schwarz, Inc. savings
Used, refurbished at 