Product specs for Rohde & Schwarz, Inc. FSH313

Product Description:

Rohde & Schwarz, Inc. FSH313 Handheld spectrum analyzer 100 kHz - 3 GHz, RBW 1 kHz - 1 MHz LCD color display, tracking gen. (P/N 1145.5850.13)

The Rohde & Schwarz, Inc. FSH313 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSH313. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Rohde & Schwarz, Inc. FSH313 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz, Inc. FSH313 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz, Inc. FSH313 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.The tracking generator extends the R&S FSH3`s range of applications to cover distance-to-fault (DTF) measurements on cables, scalar and vector network analysis and 1-port cable loss measurement.

Features

Frequency range 100 kHz to 3 GHz
High level accuracy : 0.5 dB typ
Displayed average noise level typ. -114 dBm (RBW 1KHz)
Resolution bandwidths 1kHz to 1 MHz, 1 and 3 steps
Wide range of detectors : sample, max/min peak , auto peak, RMS
Tracking Generator from 5 MHz to 3 GHz

Supplied with:

Battery Pack
AC Power Supply
RS-232 Optical Intfc Cable
CD-ROM
Headphones
AC Mains Adapter (EU)
AC Mains Adapter (UK)
AC Mains Adapter (US)
Quick Start Manulal English Ver 5.0

Performance Characteristics of the FSH313

Form Factor	Handheld
Type	Analyzer
Input Impedance	50 Ohm
Minimum Frequency	100 kHz
Maximum Frequency	3 GHz
Minimum Resolution Bandwidth	1 kHz
Maximum Resolution Bandwidth	1 MHz
Minimum Video Bandwidth	10 Hz
Maximum Video Bandwidth	1 MHz